QIDI Tech QIDI Plus5

By QIDI Tech · 3D Printers · 3D Printing

  • 320 x 320 x 300 mm build volume
  • Active chamber heating up to 65 C (550 W, 3rd gen)
  • Nozzle up to 370 C, flow 40 mm3/s, max speed 600 mm/s
  • 3-in-1 air filtration: G3 pre-filter + H12 HEPA + activated carbon, 99.5% of particles

Lowest price seen
$749.00
from $749.00 at 3D Printers Bay · Checked Oct 12, 2026

Prices are snapshots. Check the current price with the store.

Summary

A large-format enclosed CoreXY 3D printer with a 320×320×300 mm build volume, actively heated chamber up to 65°C, and 3-stage air filtration, aimed at engineering filaments like ABS, PC, and PA at a consumer price. The one thing to check before buying: the optional QIDI Box multi-color system is unreliable, and long-term reliability data is thin since the printer launched only in August 2026.

Strengths

  • Heated chamber at a price where competitors often lack one: 550 W, up to 65°C, with excellent ABS/ASA results and no warping in 3DWork’s testing.
  • Print quality that owners compare favorably to the Bambu Lab P1P: one Reddit user reported being “blown away” and said it outpaces the P1P in every situation.
  • 3-stage air filtration with H12 HEPA and activated carbon, effective at capturing ABS/ASA fumes.
  • Minimal setup: the printer ships almost fully assembled; users attach the spool holder and Bowden tubes.
  • Auto-leveling via nozzle-contact loadcell gives reliable first layers without manual intervention.
  • Runs Klipper firmware and works with QIDI Studio, OrcaSlicer, PrusaSlicer, and Cura.

Weaknesses

  • Rear filament loading is awkward; filament catches on the coupler during threading.
  • The optional QIDI Box AMS system is unreliable — Tom’s Hardware says it “still doesn’t work,” and 3DWork reports occasional sync issues.
  • Filament entry angle can cause feeding problems; community mods exist to fix it.
  • Without the QIDI Box, the printer does not detect filament jams.
  • PLA and PETG can clog the nozzle when the chamber runs too hot without active cooling or extraction.
  • Long-term reliability is unknown: the Plus5 launched in August 2026, so only about two months of owner data exists.

Verified specifications

Build volume320 × 320 × 300 mm.
Printer dimensions500 × 488 × 558 mm; net weight 29 kg, gross weight 37.8 kg.
Nozzle temperatureup to 370°C, bimetal, 0.4 mm standard (0.2/0.6/0.8 mm optional).
Bed temperatureup to 120°C.
Chamber temperatureup to 65°C, 3rd generation, 550 W independent chamber heating.
Max toolhead speed600 mm/s; acceleration up to 20,000 mm/s².
MotionCoreXY, 9 mm 1.5GT belt, X-axis linear guide rail, Z-axis dual independent lead screw motors.
Extruderdirect drive, hardened steel gears; flow rate 40 mm³/s.
Supported filamentsPLA, ABS, ASA, PETG, TPU (95A recommended), PA, PC, carbon/glass fiber reinforced polymers, PPS-CF.
Build platedouble-sided PEI magnetic on aluminum with silicone heater.
Air filter3-in-1 (G3 pre-filter + H12 HEPA + coconut shell activated carbon), captures 99.5% of dust and particles.
Auto-levelinghands-free, loadcell sensor in hotend for nozzle-contact zero-offset measurement.
AI camera640×480p default, 1920×1080p native.
Display4-inch 800×480 touch screen.
Connectivity2.4 GHz/5 GHz Wi-Fi, Ethernet, USB.
Storage32 GB EMMC, USB 2.0 flash drive.
Voltage110 V / 220–240 V AC, 50/60 Hz (region-specific).
Rated power150 W main + 550 W chamber + 500 W bed; steady-state 190 W (PLA) / 500 W (ABS).
SlicerQIDI Studio (based on BambuStudio/PrusaSlicer); compatible with OrcaSlicer, PrusaSlicer, Cura.
FirmwareKlipper-based.
Multi-colorcompatible with QIDI Box (up to 16 colors with 4 boxes).
Includedtoolkit, scraper, glue stick, USB stick with QIDI Studio and guides, power cable, Ethernet cable, 20 g PLA Rapido filament sample, replacement nozzle cutter, replacement fuse, PTFE tube extension.
Warranty1 year for all QIDI printers purchased from Amazon, AliExpress, eBay, or authorized resellers; 2-year warranty applies only to I-Fast/X-CF Pro/X-Max/X-Plus purchased from QIDI official website. 14-day no-reason return.
Full research notes and sources

Heated chamber and engineering filaments

The Plus5’s 3rd-generation chamber heater runs at 550 W and holds up to 65°C, a feature still uncommon at this price. 3DWork tested the base printer on PLA, PETG, ABS, and ASA and reported excellent ABS/ASA results with no warping. The 370°C bimetal nozzle and direct-drive extruder with hardened steel gears handle carbon-fiber and glass-fiber composites. QIDI advises setting chamber temperature about 10°C below the filament’s softening point; running it hotter without active cooling or extraction can cause PLA and PETG to clog the nozzle, as some owners have reported.

Air filtration and emissions

The integrated 3-in-1 filter combines a G3 pre-filter, H12 HEPA, and coconut shell activated carbon. QIDI rates it at 99.5% dust and particle capture. Tom’s Hardware specifically praised the HEPA filtration, and owners confirm it effectively captures ABS/ASA fumes during printing. Filter replacements are a recurring ownership cost, especially with heavy use.

Multi-color: QIDI Box and Polar Cooler

The QIDI Box is an optional accessory sold separately, or bundled in the Combo package. It supports up to 16 colors with four boxes. Max4-model QIDI Box units work directly on the Plus5; Plus4 or Q2 models require a QIDI Box Hub and Signal Cable. Tom’s Hardware’s review states the QIDI Box “still doesn’t work,” and 3DWork reported occasional QIDI Box and cloud sync issues. Without the QIDI Box, tangle detection is unavailable and the printer cannot detect filament jams. The Polar Cooler, an active toolhead cooling system, is also optional and sold separately.

Setup, software, and daily use

The printer ships almost fully assembled. Users attach the spool holder and two Bowden tubes before printing. QIDI Studio, based on BambuStudio (which is based on PrusaSlicer), is the bundled slicer; OrcaSlicer, PrusaSlicer, and Cura also work thanks to the Klipper firmware. The 4-inch touchscreen handles most tasks, though accessing the camera’s full 1080p requires manually editing crowsnest.conf through the web interface. Owners report occasional Klipper issues and QIDI Maker app bugs, including incidents where the app unbinds the printer from your account. The glass top cover feels thin and delicate, and the lower-mounted handles make lifting less convenient.

Which model this is

This page covers the QIDI Plus5 3D Printer by QIDI Tech (Zhejiang Qidi Technology Co., Ltd.), model Plus5, launched globally on August 5, 2026. The US Amazon listing is ASIN B0H5BMC2JQ. QIDI’s official US store lists the standard variant at SKU PLUS5001. The Plus5 is the successor to the QIDI Plus4 (305×305×280 mm build volume), offering 18% more build volume in the same footprint. Do not confuse it with the Plus4, Max4, Q2, or other QIDI models.

Is it worth it?

The Plus5 costs $749 from QIDI’s US store for the standard variant, $849 for the Polar Cooler bundle, $899 for the Combo with QIDI Box, and $999 for the Combo plus Polar Cooler. Fabreeko lists it at $748.99. The Bambu Lab H2S, which Tom’s Hardware says the Plus5 “gives a run for its money,” costs $1399. At $749 the Plus5 offers a compelling package for anyone printing engineering filaments, with the heated chamber as the main differentiator. Above $900, the value weakens unless you specifically need the large build volume. The weak points are the unproven QIDI Box ecosystem, ergonomic annoyances, and the absence of long-term reliability data two months after launch.

Sources

Manufacturer:

Independent reviews:

Owner reports:

Parts and stores:

Buying guides for this category

Related products