Makita 5007F 7-1/4 in. Corded Circular Saw (15 Amp)

By Makita · Circular Saws · Power Tools

  • 15 AMP motor delivering 5,800 RPM
  • 7-1/4 in. blade, cutting capacity 2-3/8 in. at 90 degrees, 1-3/4 in. at 45 degrees
  • Bevel capacity 0-45 degrees
  • Two built-in LED lights illuminate the cut line
  • Heavy gauge aluminum wraparound base with all ball bearing construction

Lowest price seen
~$159.00 (approx.)
from $159.00 at Amazon

Prices are snapshots. Check the current price with the store.

Summary

A corded 7-1/4-inch circular saw for framers, builders and contractors who want a tool that is simple, durable and cheap to keep running. Check before you buy: there is no electric brake and no variable speed, so the blade keeps coasting after you release the trigger.

Strengths

  • The 15 AMP motor pulls through dimensional lumber, plywood, OSB and LVL without bogging down.
  • Owners report decades of service; one owner’s father ran a similar Makita saw for over 30 years.
  • Two LED lights and a dust blower keep the cut line visible in dim conditions.
  • All-ball bearing construction and an aluminum wraparound base give it a reputation for job-site durability.
  • The AC/DC switch lets it run from a generator or other power source on remote job sites.
  • It is described as well balanced; a forum user calls it very easy to handle one-handed.

Weaknesses

  • No electric brake: the blade keeps coasting after the trigger is released, the most cited drawback.
  • No variable speed: the saw runs at a fixed 5,800 RPM whatever the material.
  • At 11.1 lb it gets heavy on extended overhead or all-day work.
  • The base is aluminum, not magnesium — heavier than the 5007MG variant’s.
  • Bevel detents and exact angles are not well defined, which can be tricky for new users.
  • Opinions on the included carbide blade are polarized; some users are unhappy with its quality.

Verified specifications

Model5007F.
Motor15 AMP.
No-load speed5,800 RPM.
Blade diameter7-1/4 in.
Arbor5/8 in.
Cutting capacity2-3/8 in at 90 degrees; 1-3/4 in at 45 degrees.
Bevel capacity0-45 degrees.
Weight11.1 lb.
Dimensions12 in long.
Power sourcecorded, 120 V.
Power cord8 ft.
LED lightstwo built-in.
Dust blowerbuilt-in.
Shaft lockyes.
AC/DC switchyes.
Baseheavy-gauge aluminum wraparound.
Constructionall-ball bearing.
Insulationdouble-insulated motor.
Coolingcentrifugal fan and baffle system.
Included blade7-1/4 in carbide-tipped framing blade (reviews list both 24T and 40T).
Included wrenchblade wrench.
Warranty1 year.
Full research notes and sources

Power and cutting

The 15 AMP motor turns at a fixed 5,800 RPM. Hands-on reviews describe it cutting through dimensional lumber, plywood, OSB and LVL without bogging down, and the cuts are described as smooth and accurate with a quality blade. A centrifugal fan and baffle system cools the motor, which reviewers say allows extended use without overheating. The lower guard is shaped for bevel and narrow cuts, and the flat motor housing gives a stable platform for blade changes.

Weight, balance and bevels

At 11.1 lb the saw is no lightweight, and reviews flag the weight on extended overhead or all-day work. It is still described as well balanced and easy to handle. The base is heavy-gauge aluminum wrapped around the motor: durable, but heavier than the magnesium base on the 5007MG. Bevels run 0-45 degrees; one review notes the locking options and exact angles are not well defined, which can be tricky for new users.

Blades, running costs and warranty

A 7-1/4 in carbide-tipped framing blade is included, along with a blade wrench. Reviews disagree on whether the stock blade is 24T or 40T — likely different production runs or regional variants — and opinions on its quality are polarized. Replacement carbide blades are the only real recurring cost; there is no battery or charger to buy. The saw carries a 1-year warranty, and the manual directs repairs to Makita authorized or factory service centers using Makita replacement parts, with a parts breakdown published.

Is it worth it?

In a 2024 r/Makita thread, the 5007F is listed at around $130 new, and the same thread lists the magnesium 5007MG at $170 new or $155 refurbished. Another 2024 thread quotes $59 for a corded Makita, possibly a 5007F.

At $100 or less the saw is strong value: 15 AMP power, 5,800 RPM, LED lights, a dust blower, all-ball bearing construction and a durability record measured in decades. From $101 to $130 it remains good value for professional or frequent DIY use. From $131 to $160 it is fair — compare it with the 5007MG or with corded saws that add an electric brake. Above $160 it is weak value; at that price expect features the 5007F lacks.

Which model this is

This page covers the 5007F, the aluminum-base version of Makita’s 7-1/4 in corded circular saw. It is not the 5007MG with its magnesium base and 56-degree bevel, the 5007NK kit, the 5007NB, or the 10-inch HS0600. No case is included with the 5007F; the 5007MG ships with a hard case. The US Amazon listing is ASIN B004YIALZI. No instrumented professional test of this exact model was found; the hands-on reviews and owner reports behind this page are the evidence.

Sources

Manufacturer:

Independent reviews:

Owner reports:

Buying guides for this category

Related products